Each room is comfortable and there are no cold draughts when the air conditioning is on.
Doctor, St John’s Villa Surgery
Talk to an Expert | UK: 0800 731 6352 | International: +44 1268 544530
Each room is comfortable and there are no cold draughts when the air conditioning is on.
Doctor, St John’s Villa Surgery
Each room is comfortable and there are no cold draughts when the air conditioning is on.
Doctor, St John’s Villa Surgery
The Ingenious Air® Small Duct System provides purified air with comfortable cooling and heating for your medical air conditioning and laboratory air conditioning projects. It is therefore suitable for hospitals, clinics, care homes and dentist, and doctor’s surgeries.
For medical air conditioning, the Ingenious Air® solution creates a comfortable working and care-giving environment. Temperatures are even and draught-free, which keeps your patients and clients comfortable.
For laboratory air conditioning, the system creates a stable and consistent environment for accurate testing. You can set the system to meet your requirements. These include temperature and relative humidity conditions, percentage outside air ventilation as well as number of air changes per hour. The system can achieve ISO 7 standards.
Infection prevention and control is achieved by combining high specification air purification (UVC light combined with photo-catalytic oxidation and high-level filtration) with surface purification using health-enhancing micro-organisms (environmental probiotics).
Air purification removes airborne disease-causing pathogens and particulates (viruses and bacteria, allergens and toxic pollutants) down to 0.3 micron.
Surface purification coats and cleans hard and soft surfaces with healing probiotics. This protects against bacterial infections, reduces the causes of odours and adds microbial environmental balance.
This significantly reduces healthcare acquired infection-causing pathogens (HCAI) and creates a cleaner, healthier and safer environment for both staff and patients. Air can be purified 24/7, even without cooling or heating.
The Ingenious Air® Small Duct System provides purified air with comfortable cooling and heating for your medical air conditioning and laboratory air conditioning projects. It is therefore suitable for hospitals, clinics, care homes and dentist, and doctor’s surgeries.
For medical air conditioning, the Ingenious Air® solution creates a comfortable working and care-giving environment. Temperatures are even and draught-free, which keeps your patients and clients comfortable.
For laboratory air conditioning, the system creates a stable and consistent environment for accurate testing. You can set the system to meet your requirements. These include temperature and relative humidity conditions, percentage outside air ventilation as well as number of air changes per hour. The system can achieve ISO 7 standards.
Infection prevention and control is achieved by combining high specification air purification (UVC light combined with photo-catalytic oxidation and high-level filtration) with surface purification using health-enhancing micro-organisms
(environmental probiotics).
Air purification removes airborne disease-causing pathogens and particulates (viruses and bacteria, allergens and toxic pollutants) down to 0.3 micron.
Surface purification coats and cleans hard and soft surfaces with healing probiotics. This protects against bacterial infections, reduces the causes of odours and adds microbial environmental balance.
This significantly reduces healthcare acquired infection-causing pathogens (HCAI) and creates a cleaner, healthier and safer environment for both staff and patients. Air can be purified 24/7, even without cooling or heating.
Temperatures are even and draught-free throughout, and as a result patients and clients feel comfortable.
High specification air purification dramatically improves indoor air quality. Air can be purified 24/7, even without cooling or heating.
Planned maintenance can be carried out away from the conditioned area, reducing disruption. Patient areas therefore do not need to be evacuated.
Flexible design makes future alterations due to change of room use or layout easier and much cheaper, whilst maintaining comfort levels.
The turnkey service simplifies the process for you and/or your Facilities Management team. It includes your quotation, initial design and layout if required, equipment supply, installation and follow on maintenance. We can also train your own preferred installation team.
Contact us today for a FREE informal consultation to see how we can help.
The Ingenious Air® solution enables you to design your projects with improved comfort levels and indoor air quality. This can add value to your portfolio. We can also provide design assistance on all your medical & laboratory air conditioning projects.
Contact us today for a FREE informal consultation to discuss your next project.
You can become an Approved Ingenious Air® Installer by attending our one-day course. This can open up additional revenue streams for your business. You can then install independently or under The Ingenious Air Company umbrella.
Contact us today for a FREE informal consultation to discuss your next project, or book your training.
Design Blue Ltd, the supplier of high impact safety equipment, needed comfort cooling and heating for their new D30 laboratory. They had to achieve specified temperature and relative humidity conditions to ensure the accuracy of their testing procedures.
One Ingenious Air® Small Duct System, paired with a Mitsubishi sustainable technology heat pump was installed to provide heating, cooling and humidity control.
The doctors at St John’s Villa surgery in London needed a new heating and cooling system for their refurbished practice. They wanted to improve the indoor air quality and treat patients in a comfortable and draught-free environment. Reducing the risk of transmission of airborne infection was essential.
The architect, therefore, recommended two Ingenious Air® Small Duct Systems to provide heating, cooling and air purification.
Design Blue Ltd, the supplier of high impact safety equipment, needed comfort cooling and heating for their new D30 laboratory. They had to achieve specified temperature and relative humidity conditions to ensure the accuracy of their testing procedures.
One Ingenious Air® Small Duct System, paired with a Mitsubishi sustainable technology heat pump was installed to provide heating, cooling and humidity control.
The doctors at St John’s Villa surgery in London needed a new heating and cooling system for their refurbished practice. They wanted to improve the indoor air quality and treat patients in a comfortable and draught-free environment. It was essential to reduce the risk of transmission of airborne infection.
The architect, therefore, recommended two Ingenious Air® Small Duct Systems to provide heating, cooling and air purification.
The Ingenious Air® Turnkey Package includes all four services and makes the process as easy for you as possible: We provide your quotation, design your layout, supply your equipment, complete your installation, and follow up with regular maintenance. Contact us today for your FREE quotation or for more information.
You receive a FREE budget quotation and an initial layout (where required).
We consider all relevant factors to achieve your desired outcome. These include building design and use, occupant requirements and ductwork design.
If you then also require a more specific design or CAD drawing, this may incur a design fee. This is usually credited when we receive your order.
You can use our equipment supply only service in the UK and internationally.
The system is designed for quick, intuitive and technician-friendly installation. This means your own preferred installers can carry out the installation.
Installers must undertake our one day training course, to learn the process. In addition we provide full installation back up, advice and technical support.
Your installation is completed at a convenient time to suit you.
Installation timescales do vary depending on your project requirements, building design and site conditions, so are therefore advised on an individual basis.
Your installation is carried out by fully trained Ingenious Air® Approved Installers. Retrofit projects can be installed by area resulting in the continued use of your building.
Your new system needs regular check-ups every six to twelve months.
Preventative, planned maintenance keeps your new system working efficiently while ensuring that you meet your legal requirements.
The frequency is determined by system functions, usage and site location. We keep all relevant records and also remind you when your maintenance is due.
Your system needs regular check-ups every six to twelve months. Preventative, planned maintenance ensures your system works efficiently and meets legal requirements.
For your convenience, we keep all relevant maintenance records for your system. We also send you maintenance reminders.
You could join our carefully chosen team of enthusiastic, UK and International Re-Sellers, Approved Installers and Designers of the Ingenious Air® Small Duct System.
Adding this new generation climate control solution to your portfolio could provide a prosperous revenue stream.
UK: 0800 731 6352
International: +44 1268 544530
Email: info@ingenious-air.com
Social: @IngeniousAir
Head Office: Unit 5 Barleylands Equestrian Centre, Whites Farm, Barleylands Road, Basildon, Essex, SS15 4BG, UK
Our Website uses cookies to improve your experience. Please visit our page for more information about cookies and how we use them.
Close